FREE U.S SHIPPING ON ALL ORDERS *
CALL NOW +1 (305) 999-5212
24/7 LIVE customer service
* within the 48 contiguous United States
excluding Generators / Gyros / Water Makers
Shop by Category
-
All Products -
Accessories -
Air Heater -
Anchor & Docking -
Batteries & Battery Chargers -
Boat Control Systems -
Boat Portholes & Windows -
Boat Seats -
Bow Thrusters -
Cabin & Galley -
Capstans -
Electronic & Navigation -
Energy Range -
Engines -
Exhaust Systems
Icom M510BB Black Box VHF With HM195GW White
22%
OFF
SKU: ICOM510BBGW21USA
Category:
All Product 6
$979.95
🚚 FREE SHIPPING INCLUDED 🚚
Icom M510BB Black Box VHF With HM195GW White
SKU
ICOM510BBGW21USA
Product type
Communications
List price
$1,249.00
Sale price
$979.95
Date Created
26 / 11 / 2024
Product details
icom M510BB Black Box VHF with HM195GW White CommandMic
Model: M510 BB GW 21 USAIcom’s M510BB is perfect for boats that need AIS receive functionality without taking up precious helm space. The supplied CommandMic™ provides all the safety and communication functions for commercial and leisure boaters.
The M510BB consists of a CommandMic™ and black box RF unit. Use the CommandMic™ for all operations including DSC. Install the RF unit out of sight, place up to 60 ft (18.3 m)* away from the CommandMic™.
Add up to two additional CommandMic™ microphones for boats requiring two or three comms stations. Extend communication points around the boat including the cockpit, fly bridge, and tower. Access the intercom functions for one-to-all or one-to-one communications on the boat.
The M510BB includes an integrated AIS receiver, perfect for remote station information via the CommandMic™, or integrated into the NMEA 2000® bus to display radar and chart plotter information on an MFD (Multi-Function Display).
In addition to the conveniently located DSC button on the back of every CommandMic™, the M510BB introduces a dedicated DSC Remote Control (EN 300 338-8 compatible) terminal, allowing a connection to an external device to centralize emergency communications control.
The M510BB has a last call voice recording function automatically saves up to two minutes of an incoming call.
The NMEA 2000® network provides plug-and-play data communication to inter-connect other marine equipment such as an MFD (Multi-Function Display). The radio can send AIS, GNSS (GPS) position, DSC call, and radio channels to other equipment.
On the back of every CommandMic™ is a conveniently located DSC button. Once triggered, the M510BB transmits a DSC alert signal to nearby vessels with the MMSI* and GPS location of your vessel. *MMSI number must be obtained and programmed for each vessel/radio.
The built-in 15W amplifier increases the audio output of an external hailer speaker. The one-way RX hailer function enables you to broadcast radio traffic through the hailer speaker to listen to radio traffic on the deck or tower. You can also sound foghorn patterns from the hailer speaker.
The Active Noise Cancelling function digitally removes background noise from transmitting and receiving audio to provide clear communications in noisy maritime environments.
Specifications| General | |
| Usable channels | USA, INT, CAN, WX channels |
| Power supply requirement | 13.8 V DC nominal (11.7 ~ 15.9 V DC) (Negative ground) |
| Current drain (at 13.8 V DC) | TX Max. power - 5.5 A Max. RX Max. audio - 1.5 A (One CommandMic™) 4.5 A (Three CommandMic™ and RX hailer) |
| Operating temperature range | —20°C ~ 60°C, —4°F ~ 140°F |
| Antenna impedance | 50 ohm nominal |
| Weight (approx.) | RF unit - 890 g; 2 lb CommandMic™ - 400 g; 14.1 oz |
| Transmitter | |
| Output power (at 13.8V DC) | 25 W, 1 W (High, Low) |
| Max. frequency deviation | ±5 kHz |
| Frequency tolerance | ±0.5 kHz |
| Spurious emissions | Less than —70 dBc (High power), Less than —56 dBc (Low power) |
| Residual modulation | More than 40 dB |
| Adjacent channel power | More than 70 dB |
| Receiver | |
| Sensitivity FM (at 12dB SINAD) | 0.22 µV typical |
| Sensitivity DSC (at 1% BER) | —7 dBµemf typical |
| Adjacent channel selectivity FM | More than 70 dB |
| Adjacent channel selectivity DSC (1% BER) | More than 73 dBµ emf |
| Spurious response FM | More than 70 dB |
| Spurious response DSC (1% BER) | More than 73 dBµ emf |
| Intermodulation FM | More than 75 dB |
| Intermodulation DSC (1% BER) | More than 68 dBµ emf |
| Hum and noise | More than 40 dB |
What's in the Box:
- IC-M510BB
- DC power cable (2 m)
- Microphone Hanger
- Connection cable, OPC-1540 (6.1 m, 20 ft)
- CommandMic™, HM-195GW
- Connector cap
- Mounting base
Product details
icom M510BB Black Box VHF with HM195GW White CommandMic
Model: M510 BB GW 21 USAIcom’s M510BB is perfect for boats that need AIS receive functionality without taking up precious helm space. The supplied CommandMic™ provides all the safety and communication functions for commercial and leisure boaters.
The M510BB consists of a CommandMic™ and black box RF unit. Use the CommandMic™ for all operations including DSC. Install the RF unit out of sight, place up to 60 ft (18.3 m)* away from the CommandMic™.
Add up to two additional CommandMic™ microphones for boats requiring two or three comms stations. Extend communication points around the boat including the cockpit, fly bridge, and tower. Access the intercom functions for one-to-all or one-to-one communications on the boat.
The M510BB includes an integrated AIS receiver, perfect for remote station information via the CommandMic™, or integrated into the NMEA 2000® bus to display radar and chart plotter information on an MFD (Multi-Function Display).
In addition to the conveniently located DSC button on the back of every CommandMic™, the M510BB introduces a dedicated DSC Remote Control (EN 300 338-8 compatible) terminal, allowing a connection to an external device to centralize emergency communications control.
The M510BB has a last call voice recording function automatically saves up to two minutes of an incoming call.
The NMEA 2000® network provides plug-and-play data communication to inter-connect other marine equipment such as an MFD (Multi-Function Display). The radio can send AIS, GNSS (GPS) position, DSC call, and radio channels to other equipment.
On the back of every CommandMic™ is a conveniently located DSC button. Once triggered, the M510BB transmits a DSC alert signal to nearby vessels with the MMSI* and GPS location of your vessel. *MMSI number must be obtained and programmed for each vessel/radio.
The built-in 15W amplifier increases the audio output of an external hailer speaker. The one-way RX hailer function enables you to broadcast radio traffic through the hailer speaker to listen to radio traffic on the deck or tower. You can also sound foghorn patterns from the hailer speaker.
The Active Noise Cancelling function digitally removes background noise from transmitting and receiving audio to provide clear communications in noisy maritime environments.
Specifications| General | |
| Usable channels | USA, INT, CAN, WX channels |
| Power supply requirement | 13.8 V DC nominal (11.7 ~ 15.9 V DC) (Negative ground) |
| Current drain (at 13.8 V DC) | TX Max. power - 5.5 A Max. RX Max. audio - 1.5 A (One CommandMic™) 4.5 A (Three CommandMic™ and RX hailer) |
| Operating temperature range | —20°C ~ 60°C, —4°F ~ 140°F |
| Antenna impedance | 50 ohm nominal |
| Weight (approx.) | RF unit - 890 g; 2 lb CommandMic™ - 400 g; 14.1 oz |
| Transmitter | |
| Output power (at 13.8V DC) | 25 W, 1 W (High, Low) |
| Max. frequency deviation | ±5 kHz |
| Frequency tolerance | ±0.5 kHz |
| Spurious emissions | Less than —70 dBc (High power), Less than —56 dBc (Low power) |
| Residual modulation | More than 40 dB |
| Adjacent channel power | More than 70 dB |
| Receiver | |
| Sensitivity FM (at 12dB SINAD) | 0.22 µV typical |
| Sensitivity DSC (at 1% BER) | —7 dBµemf typical |
| Adjacent channel selectivity FM | More than 70 dB |
| Adjacent channel selectivity DSC (1% BER) | More than 73 dBµ emf |
| Spurious response FM | More than 70 dB |
| Spurious response DSC (1% BER) | More than 73 dBµ emf |
| Intermodulation FM | More than 75 dB |
| Intermodulation DSC (1% BER) | More than 68 dBµ emf |
| Hum and noise | More than 40 dB |
What's in the Box:
- IC-M510BB
- DC power cable (2 m)
- Microphone Hanger
- Connection cable, OPC-1540 (6.1 m, 20 ft)
- CommandMic™, HM-195GW
- Connector cap
- Mounting base
Print friendly
Download this print friendly page
Shipping & Returns
Shipping within the US
Promotional Shipping (e.g., free shipping) is only applied to orders shipped within the contiguous United States and does not apply to Alaska, Hawaii, Puerto Rico or the US Virgin Islands. All shipments to Alaska or Hawaii and any other territories under the control of the United States may incur additional shipping charges based upon the location, weight and dimensions of the package once secured for shipment. Due to the distance of the above mentioned locations, please be aware that shipments may take a minimum of 5 business days to arrive.
Expedited shipping costs provided by MMarine are only an estimate. You will be notified if the actual shipping cost exceeds the estimated shipping cost. We will never charge an increased shipping fee without your consent!
International Shipping
If your shipping address is located outside of the US, additional tax duties beyond our control may apply to collect your order upon delivery. Please be advised that shipping charges displayed on our website DO NOT INCLUDE customs, duties, or brokerage and import fees. Since these additional duties are unforeseen and unassociated with MMarine Online, it's the recipients responsibility to pay all applicable duties, taxes and brokerage fees that may apply upon the delivery and/or collection of your order.
Returns
A 25% RESTOCKING FEE WILL BE APPLIED TO ALL RETURNS. Returns made within 30 days of the purchase date will be refunded to the original form of payment. Any returns initiated beyond 30 days of purchase will not be accepted. NO EXCEPTIONS. We reserve the right to refuse returns or assess additional fees at our discretion based upon the condition of the item(s) returned. ALL HIGH TICKET ITEMS ARE FINAL SALE. NO RETURNS, NO EXCHANGES.
If you need to return an item, please Contact Us with your order number and details about the item. We will respond with instructions on how to return the item(s). Please ensure the item(s) are returned in its original packaging and properly secured for return shipment. Insurance MUST be applied to your return and tracking information of your return must be supplied to MMarine Online via email at info@mmarineonline.com
Damages
We thoroughly inspect each item(s) prior to shipment to ensure and guarantee that the item(s) is free of any cosmetic damages and/or missing parts. While we take extra measures to ensure safe and secure shipment of your product, issues during shipment - while rare - are possible.
Upon receiving shipments from MMarine Online and our partner shipping carriers, it is critical that you IMMEDIATELY inspect the package for damage PRIOR to signing for it and before accepting delivery from the carrier. If any damage is present, it MUST be noted on the carriers slip and reported to MMarine Online IMMEDIATELY. If damage is discovered after accepting a shipment, it MUST be reported to MMarine Online within 72 hours of the delivery.
In the event that damage is reported beyond 72 hours of delivery, MMarine Online will not accept any responsibility in replacing and/or further servicing your order.
It is imperitive that you document the damage(s), this means photos of the exterior of the box MUST be supplied along with photos of the visible damage(s). It is crucial that ALL packaging- the bubble wrap, the box and pallet be saved, as required by the insurance company to file and successfully submit a claim of damage.
We will replace defective products with an exchange for the same model and style ONLY.
If your parcel is left without a signature and damage is found, please contact us within 48 hours at (305)999-5212 or via email at info@mmarineonline.com. Your package should be unopened, unused and remain in the condition in which it was delivered until you successfully report a claim with MMarine Online.
Return on Electronics - Serial Number Policy
On returns of all electronics, serial numbers must match with serial number of product originally shipped and will undergo inspection; if serial numbers are not matching, a refund will not be issued.
Warranty
All warranty claims should be made directly with the manufacturer.
Should you require any assistance, we're more than happy to help establish contact with the manufacturer to assist you with the initiation of your claim and/or inquiry. If you require further support please call (305) 999-5212 or email us at INFO@MMARINEONLINE.COM
Reviews
My offers
