Xantrex Truecharge 2 10AMP
Rated 3.5/5 based on 11 customer reviews

Xantrex Truecharge 2 10AMP

Available: In Stock
Wishlist Compare
$340.81 $358.75
Successful pre-order.Thanks for contacting us!
Image

Xantrex TrueCharge2 10A Battery Charger
2 banks, 110/220V Input, 12v Output

Model: 804-1210
UPC: 687873007741

  • Microprocessor-controlled, multistage charging algorithms
  • Charges flooded, gel, AGM or lead-calcium batteries
  • Auto-ranging universal input voltage (90-265 Vac, 47-63 Hz) is also compatible with a generator or other low-quality power sources
  • Power factor corrected, temperature-compensated charging
  • Ability to charge healthy batteries drained to low voltage
  • Mounting is possible in a variety of orientations and in areas where space is limited
  • Easy access to AC and DC wiring from one side
  • Tested to conform to ingress protection rating IP32 and meets UL1564, UL1236 including marine supplement and ABYC standards
  • Reverse battery polarity protection
  • Drip-proof design
  • Over temperature protection
  • DC over-voltage protection
  • Battery overcharging protection

The new TRUECHARGE2 10-amp charger replaces the former best-selling, first-generation TRUECHARGE 10TB unit and features universal auto ranging input voltage (90 Vac to 265 Vac, 47 to 63 Hz), which can be used in most parts of the world. The TRUECHARGE2 10-amp is smaller and lighter than its predecessor and can be mounted in a variety of positions.

The TRUECHARGE2 10-amp charger uses power factor correction to deliver a full three-stage charge cycle. As a result, the charger requires less incoming AC power to operate at its peak efficiency, freeing up more usable AC power for onboard electronics. The TREUCHARGE2 10-amp charger meets stringent safety and regulatory standards including UL1564 and UL1236.

Regulatory Compliance
CSA E60335-2-29, UL1564, and UL1236 including the Marine Supplement and drip test. CE Marked for the Low Voltage Directive (safety) and the EMC Directive. Complies with IEC 60335-2-29 including Australian deviations. Ingress protection rating IP32 per EN/IEC 60529. Complies with FCC Part 15B and Industry Canada ICES-003 Class B emissions limits. Complies with ABYC A-31

                    Specifications

                    Electrical Specifications 

                    Output current (nominal) 10A
                    Charge 14.2 - 15.5 Vdc
                    Float 13.4 - 13.8 Vdc
                    Equalize NA
                    DC Output connections 2
                    AC input voltage 90-265 VAC 47-63 Hz 120VAC, 230 Vac, 240vac Nominal
                    Temperature compensation Temperature compensation
                    Charger efficiency > 80%
                    Battery type Gel, Flooded, AGM, and Pb-Ca
                    Minimum recommended battery bank size 20 Ah

                      

                    General Specifications  

                    Operating temperature range
                    0-65°C
                    Storage temperature range -40-80 C
                    Battery connection Two positive terminals
                    One negative terminal
                    Dimensions(HxWxL) 2.7 x 5.4 x 8.8

                     

                    Data Sheet

                    Owner's Manual

                      Xantrex TrueCharge2 10A Battery Charger
                      2 banks, 110/220V Input, 12v Output

                      Model: 804-1210
                      UPC: 687873007741

                      • Microprocessor-controlled, multistage charging algorithms
                      • Charges flooded, gel, AGM or lead-calcium batteries
                      • Auto-ranging universal input voltage (90-265 Vac, 47-63 Hz) is also compatible with a generator or other low-quality power sources
                      • Power factor corrected, temperature-compensated charging
                      • Ability to charge healthy batteries drained to low voltage
                      • Mounting is possible in a variety of orientations and in areas where space is limited
                      • Easy access to AC and DC wiring from one side
                      • Tested to conform to ingress protection rating IP32 and meets UL1564, UL1236 including marine supplement and ABYC standards
                      • Reverse battery polarity protection
                      • Drip-proof design
                      • Over temperature protection
                      • DC over-voltage protection
                      • Battery overcharging protection

                      The new TRUECHARGE2 10-amp charger replaces the former best-selling, first-generation TRUECHARGE 10TB unit and features universal auto ranging input voltage (90 Vac to 265 Vac, 47 to 63 Hz), which can be used in most parts of the world. The TRUECHARGE2 10-amp is smaller and lighter than its predecessor and can be mounted in a variety of positions.

                      The TRUECHARGE2 10-amp charger uses power factor correction to deliver a full three-stage charge cycle. As a result, the charger requires less incoming AC power to operate at its peak efficiency, freeing up more usable AC power for onboard electronics. The TREUCHARGE2 10-amp charger meets stringent safety and regulatory standards including UL1564 and UL1236.

                      Regulatory Compliance
                      CSA E60335-2-29, UL1564, and UL1236 including the Marine Supplement and drip test. CE Marked for the Low Voltage Directive (safety) and the EMC Directive. Complies with IEC 60335-2-29 including Australian deviations. Ingress protection rating IP32 per EN/IEC 60529. Complies with FCC Part 15B and Industry Canada ICES-003 Class B emissions limits. Complies with ABYC A-31

                                        Specifications

                                        Electrical Specifications 

                                        Output current (nominal) 10A
                                        Charge 14.2 - 15.5 Vdc
                                        Float 13.4 - 13.8 Vdc
                                        Equalize NA
                                        DC Output connections 2
                                        AC input voltage 90-265 VAC 47-63 Hz 120VAC, 230 Vac, 240vac Nominal
                                        Temperature compensation Temperature compensation
                                        Charger efficiency > 80%
                                        Battery type Gel, Flooded, AGM, and Pb-Ca
                                        Minimum recommended battery bank size 20 Ah

                                          

                                        General Specifications  

                                        Operating temperature range
                                        0-65°C
                                        Storage temperature range -40-80 C
                                        Battery connection Two positive terminals
                                        One negative terminal
                                        Dimensions(HxWxL) 2.7 x 5.4 x 8.8

                                         

                                        Data Sheet

                                        Owner's Manual

                                          Shipping within the US

                                          Promotional Shipping (e.g., free shipping) is only applied to orders shipped within the contiguous United States and does not apply to Alaska, Hawaii, Puerto Rico or the US Virgin Islands. All shipments to Alaska or Hawaii and any other territories under the control of the United States may incur additional shipping charges based upon the location, weight and dimensions of the package once secured for shipment. Due to the distance of the above mentioned locations, please be aware that shipments may take a minimum of 5 business days to arrive. 

                                          Expedited shipping costs provided by MMarine are only an estimate. You will be notified if the actual shipping cost exceeds the estimated shipping cost. We will never charge an increased shipping fee without your consent! 

                                          International Shipping

                                          If your shipping address is located outside of the US, additional tax duties beyond our control may apply to collect your order upon delivery. Please be advised that shipping charges displayed on our website DO NOT INCLUDE customs, duties, or brokerage and import fees. Since these additional duties are unforeseen and unassociated with MMarine Online, it's the recipients responsibility to pay all applicable duties, taxes and brokerage fees that may apply upon the delivery and/or collection of your order. 

                                          International shipping costs displayed on our website are only an estimate. You will be notified if the actual shipping cost exceeds the estimated shipping cost. We will never charge an increased shipping fee without your consent! 

                                          Returns

                                          A 25% RESTOCKING FEE WILL BE APPLIED TO ALL RETURNSReturns made within 30 days of the purchase date will be refunded via check. Any returns initiated beyond 30 days of purchase will not be accepted. NO EXCEPTIONS. We reserve the right to refuse returns or assess additional fees at our discretion based upon the condition of the item(s) returned. ALL HIGH TICKET ITEMS ARE FINAL SALE. NO RETURNS, NO EXCHANGES.    

                                          If you need to return an item, please Contact Us with your order number and details about the item. We will respond with instructions on how to return the item(s). Please ensure the item(s) are returned in its original packaging and properly secured for return shipment. Insurance MUST be applied to your return and tracking information of your return must be supplied to MMarine Online via email at info@mmarineonline.com

                                          Damages

                                          We thoroughly inspect each item(s) prior to shipment to ensure and guarantee that the item(s) is free of any cosmetic damages and/or missing parts. While we take extra measures to ensure safe and secure shipment of your product, issues during shipment - while rare - are possible. 

                                          Upon receiving shipments from MMarine Online and our partner shipping carriers, it is critical that you IMMEDIATELY inspect the package for damage PRIOR to signing for it and before accepting delivery from the carrier. If any damage is present, it MUST be noted on the carriers slip and reported to MMarine Online IMMEDIATELYIf damage is discovered after accepting a shipment, it MUST be reported to MMarine Online within 72 hours of the delivery. In the event that damage is reported beyond 72 hours of delivery, MMarine Online will not accept any responsibility in replacing and/or further servicing your order.

                                          It is imperitive that you document the damage(s), this means photos of the exterior of the box MUST be supplied along with photos of the visible damage(s). It is crucial that ALL packaging- the bubble wrap, the box and pallet be saved, as required by the insurance company to file and successfully submit a claim of damage.

                                          We will replace defective products with an exchange for the same model and style ONLY.

                                          If your parcel is left without a signature and damage is found, please contact us within 48 hours at (305)999-5212 or via email at info@mmarineonline.com. Your package should be unopened, unused and remain in the condition in which it was delivered until you successfully report a claim with MMarine Online.

                                          Return on Electronics - Serial Number Policy

                                          On returns of all electronics, serial numbers must match with serial number of product originally shipped and will undergo inspection; if serial numbers are not matching, a refund will not be issued.

                                          Manufacturer Support and Warranty Claims

                                          All warranty claims should be made directly with the manufacturer, with the exception of Vitrifrigo warranty claims which will be initiated with MMarine Online. Should you require any assistance, we're more than happy to help establish contact with the manufacturer to assist you with the initiation of your claim and/or inquiry. If you require further support please call (305)999-5212 or email us at info@mmarineonline.com