Powerful. Configurable. Versatile...
The NEW GENERATION Freedom SW series represents highly sophisticated and advanced inverter/ chargers available in 3000 W with 150 A charger and 2000 W with 100 A charger models.
The second generation 2000 watt model has been completely redesigned to include many of the same great features found in its high power counterpart. A key feature enhancement is ?Generator Support Mode? which enables the Freedom SW to supplement a generator when AC loads exceed the generator's capacity. The new generation models also feature improved AC transfer/AC input detection time, providing the ability to transfer AC loads to batteries in less than 10 milliseconds when the incoming grid or generator power is lost. Connected loads are almost unable to feel the power transition due to this quick transfer time. Both models are approved to UL458 with marine supplement, CSA, ABYC and FCC, Class B requirements.
NEW - PARALLEL AND SERIES STACKING
Parallel stacking enables the Freedom SW inverter/chargers to double the AC output in inverter mode. Series stacking enables the Freedom SW inverter/chargers to generate 120/240 V split phase output
AC source must be split phase, requires Stacking Cable (part# 808-9005)
ApplicationDesigned for a variety of mobile applications such as commercial, emergency and recreational vehicles, marine vessels, construction and military equipment.
- Pure sine wave output to operate sensitive electronics
- Advanced configuration options for customized applications
- Parallel and series stacking capability
- Built-in transfer switch automatically transfers between inverter power and incoming AC power
- Power factor corrected, multi-stage charger for fast, efficient charging
- Temperature compensated charging for a vareity of climate conditions
- Ignition lockout feature helps prevent unnecessary battery drain when the alternator is not providing power*
- Wide operating temperature range: -4 F to 140 F (-20 C to 60 C)
- Conformal coated circuit boards for humid environments
- Dual input / Dual output AC interface for 3000 W model
- Ability to charge batteries drained to extremely low voltage
- Compatible with the Xantrex Automatic Generator Start** (Part# 809-0915)
*When used with the remote panel
**Sold separately
Protection Features
- Battery over-voltage and under-voltage protection
- Over-temperature shutdown
- Automatic overload protection
- Short-circuit protection
- Integrated, resettable AC breakers
Specifications
Inverter Specifications
| Output power (continuous @ 40 C) | 3000W |
| Surge rating (5 seconds) | 6000W |
| Peak output current | 80A |
| Output frequency | 60Hz +/- 0.2hz |
| Output voltage | 120 Vac |
| Output wave form | Pure sine wave |
| Optimal efficiency | 90% |
| No-load power draw (inverting) | 3Adc |
| Input DC voltage range | 10 - 16Vdc |
| AC connections | Split phase in/dual out, Dual in / dual out |
Charger Specifications
| Output current (continuous @ 25 C) | 150A |
| Output voltage | 12V DC |
| Output voltage range | 3 - 16Vdc |
| Charge control | 3 stage with manual equalize |
| Charge temperature compensation | Remote battery sensor (included) |
| Optimal efficiency | >85% |
| AC input power factor (maximum charge) | 0.98 typical |
| Input current (for maximum charging) | 24A rms nominal |
| Input AC voltage | 120vac |
| Input AC voltage range | 85-140 Vac |
| Dead battery charge | >3Vdc |
General Specifications
| Compatible battery types | Flooded/Gel/AGM |
| Tranfer relay rating | 2 legs 30A each |
| Transfer time ( AC to inverter and Inverter to AC) | < 20ms |
| Optimal operating temperature range | -4°F to 140°F |
| Storage ambient temperature range | -40°F to 185°F |
| Unit Dimension | 7.75" x 13.5" x 15.25" |
| Unit Weight | 73.7lbs |
| Warranty | 2 years |
Powerful. Configurable. Versatile...
The NEW GENERATION Freedom SW series represents highly sophisticated and advanced inverter/ chargers available in 3000 W with 150 A charger and 2000 W with 100 A charger models.
The second generation 2000 watt model has been completely redesigned to include many of the same great features found in its high power counterpart. A key feature enhancement is ?Generator Support Mode? which enables the Freedom SW to supplement a generator when AC loads exceed the generator's capacity. The new generation models also feature improved AC transfer/AC input detection time, providing the ability to transfer AC loads to batteries in less than 10 milliseconds when the incoming grid or generator power is lost. Connected loads are almost unable to feel the power transition due to this quick transfer time. Both models are approved to UL458 with marine supplement, CSA, ABYC and FCC, Class B requirements.
NEW - PARALLEL AND SERIES STACKING
Parallel stacking enables the Freedom SW inverter/chargers to double the AC output in inverter mode. Series stacking enables the Freedom SW inverter/chargers to generate 120/240 V split phase output
AC source must be split phase, requires Stacking Cable (part# 808-9005)
ApplicationDesigned for a variety of mobile applications such as commercial, emergency and recreational vehicles, marine vessels, construction and military equipment.
- Pure sine wave output to operate sensitive electronics
- Advanced configuration options for customized applications
- Parallel and series stacking capability
- Built-in transfer switch automatically transfers between inverter power and incoming AC power
- Power factor corrected, multi-stage charger for fast, efficient charging
- Temperature compensated charging for a vareity of climate conditions
- Ignition lockout feature helps prevent unnecessary battery drain when the alternator is not providing power*
- Wide operating temperature range: -4 F to 140 F (-20 C to 60 C)
- Conformal coated circuit boards for humid environments
- Dual input / Dual output AC interface for 3000 W model
- Ability to charge batteries drained to extremely low voltage
- Compatible with the Xantrex Automatic Generator Start** (Part# 809-0915)
*When used with the remote panel
**Sold separately
Protection Features
- Battery over-voltage and under-voltage protection
- Over-temperature shutdown
- Automatic overload protection
- Short-circuit protection
- Integrated, resettable AC breakers
Specifications
Inverter Specifications
| Output power (continuous @ 40 C) | 3000W |
| Surge rating (5 seconds) | 6000W |
| Peak output current | 80A |
| Output frequency | 60Hz +/- 0.2hz |
| Output voltage | 120 Vac |
| Output wave form | Pure sine wave |
| Optimal efficiency | 90% |
| No-load power draw (inverting) | 3Adc |
| Input DC voltage range | 10 - 16Vdc |
| AC connections | Split phase in/dual out, Dual in / dual out |
Charger Specifications
| Output current (continuous @ 25 C) | 150A |
| Output voltage | 12V DC |
| Output voltage range | 3 - 16Vdc |
| Charge control | 3 stage with manual equalize |
| Charge temperature compensation | Remote battery sensor (included) |
| Optimal efficiency | >85% |
| AC input power factor (maximum charge) | 0.98 typical |
| Input current (for maximum charging) | 24A rms nominal |
| Input AC voltage | 120vac |
| Input AC voltage range | 85-140 Vac |
| Dead battery charge | >3Vdc |
General Specifications
| Compatible battery types | Flooded/Gel/AGM |
| Tranfer relay rating | 2 legs 30A each |
| Transfer time ( AC to inverter and Inverter to AC) | < 20ms |
| Optimal operating temperature range | -4°F to 140°F |
| Storage ambient temperature range | -40°F to 185°F |
| Unit Dimension | 7.75" x 13.5" x 15.25" |
| Unit Weight | 73.7lbs |
| Warranty | 2 years |
Shipping within the US
Promotional Shipping (e.g., free shipping) is only applied to orders shipped within the contiguous United States and does not apply to Alaska, Hawaii, Puerto Rico or the US Virgin Islands. All shipments to Alaska or Hawaii and any other territories under the control of the United States may incur additional shipping charges based upon the location, weight and dimensions of the package once secured for shipment. Due to the distance of the above mentioned locations, please be aware that shipments may take a minimum of 5 business days to arrive.
Expedited shipping costs provided by MMarine are only an estimate. You will be notified if the actual shipping cost exceeds the estimated shipping cost. We will never charge an increased shipping fee without your consent!
International Shipping
If your shipping address is located outside of the US, additional tax duties beyond our control may apply to collect your order upon delivery. Please be advised that shipping charges displayed on our website DO NOT INCLUDE customs, duties, or brokerage and import fees. Since these additional duties are unforeseen and unassociated with MMarine Online, it's the recipients responsibility to pay all applicable duties, taxes and brokerage fees that may apply upon the delivery and/or collection of your order.
International shipping costs displayed on our website are only an estimate. You will be notified if the actual shipping cost exceeds the estimated shipping cost. We will never charge an increased shipping fee without your consent!
Returns
A 25% RESTOCKING FEE WILL BE APPLIED TO ALL RETURNS. Returns made within 30 days of the purchase date will be refunded via check. Any returns initiated beyond 30 days of purchase will not be accepted. NO EXCEPTIONS. We reserve the right to refuse returns or assess additional fees at our discretion based upon the condition of the item(s) returned. ALL HIGH TICKET ITEMS ARE FINAL SALE. NO RETURNS, NO EXCHANGES.
If you need to return an item, please Contact Us with your order number and details about the item. We will respond with instructions on how to return the item(s). Please ensure the item(s) are returned in its original packaging and properly secured for return shipment. Insurance MUST be applied to your return and tracking information of your return must be supplied to MMarine Online via email at info@mmarineonline.com
Damages
We thoroughly inspect each item(s) prior to shipment to ensure and guarantee that the item(s) is free of any cosmetic damages and/or missing parts. While we take extra measures to ensure safe and secure shipment of your product, issues during shipment - while rare - are possible.
Upon receiving shipments from MMarine Online and our partner shipping carriers, it is critical that you IMMEDIATELY inspect the package for damage PRIOR to signing for it and before accepting delivery from the carrier. If any damage is present, it MUST be noted on the carriers slip and reported to MMarine Online IMMEDIATELY. If damage is discovered after accepting a shipment, it MUST be reported to MMarine Online within 72 hours of the delivery. In the event that damage is reported beyond 72 hours of delivery, MMarine Online will not accept any responsibility in replacing and/or further servicing your order.
It is imperitive that you document the damage(s), this means photos of the exterior of the box MUST be supplied along with photos of the visible damage(s). It is crucial that ALL packaging- the bubble wrap, the box and pallet be saved, as required by the insurance company to file and successfully submit a claim of damage.
We will replace defective products with an exchange for the same model and style ONLY.
If your parcel is left without a signature and damage is found, please contact us within 48 hours at (305)999-5212 or via email at info@mmarineonline.com. Your package should be unopened, unused and remain in the condition in which it was delivered until you successfully report a claim with MMarine Online.
Return on Electronics - Serial Number Policy
On returns of all electronics, serial numbers must match with serial number of product originally shipped and will undergo inspection; if serial numbers are not matching, a refund will not be issued.
Manufacturer Support and Warranty Claims
All warranty claims should be made directly with the manufacturer, with the exception of Vitrifrigo warranty claims which will be initiated with MMarine Online. Should you require any assistance, we're more than happy to help establish contact with the manufacturer to assist you with the initiation of your claim and/or inquiry. If you require further support please call (305)999-5212 or email us at info@mmarineonline.com
